Merge branch 'powermode-PicoPix2055'

[libam7xxx.git] / README.asciidoc

diff --git a/README.asciidoc b/README.asciidoc
index 7ad02de..d11a92f 100644 (file)
--- a/README.asciidoc
+++ b/README.asciidoc
@@ -44,8 +44,8 @@ manually with the command:
    --default-product 0x1101 \
    --message-content 55534243087052890000000000000cff020000000000000000000000000000
 
-Alternatively, on systems where libusb works but 'usb_mode_switch' is not
-easily available, the switch can be performed using the 'am7xxx_mode_switch'
+Alternatively, on systems where libusb works but 'usb-modeswitch' is not
+easily available, the switch can be performed using the 'am7xxx-modeswitch'
 example program from libam7xxx.
 
 Examples of devices based on AM7XXX are:
@@ -55,13 +55,16 @@ Examples of devices based on AM7XXX are:
       * http://support.acer.com/product/default.aspx?modelId=3888
 
   - Philips/SagemCom PicoPix projectors (PPX 1020, PPX 1230, PPX 1430, PPX
-    1630, PPX 2055):
+    1630, PPX 2055, PPX 2330):
       * http://www.philips.co.uk/c/pocket-projector/179840/cat/
       * http://www.sagemcom.com/EN/products/image-sound/pico-video-projectors.html
 
   - CEL-TEC MP-01:
       * http://www.kabelmanie.cz/miniprojektor-cel-tec-mp-01/
 
+  - Top-Height/TEC PP700
+      * http://www.ishopiwin.com/en/appliances-electronics/electronics/projectors/pico-projector-pp-700.html
+
   - Royaltek PJU-2100:
       * http://www.royaltek.com/index.php/pju-2100-pico-projector
   
@@ -88,7 +91,7 @@ All the needed files need to be in the same location:
 
   - 'libssp-0.dll' from MinGW;
 
-  - 'am7xxx_mode_switch.exe', 'libam7xxx.dll' and 'picoproj.exe' which can all
+  - 'am7xxx-modeswitch.exe', 'libam7xxx.dll' and 'picoproj.exe' which can all
     be built by following the instructions in the HACKING.asciidoc document
     from libam7xxx.
 
@@ -106,7 +109,7 @@ for both the mass storage device and the display device:
     from now on the virtual CD-ROM can't be accessed anymore until the
     +USBSTOR+ Driver is restored.
 
-  - Run 'am7xxx_mode_switch.exe'
+  - Run 'am7xxx-modeswitch.exe'
 
   - When the new (display) device shows up, run Zadig and install the +WinUSB+
     driver for it too.