+ va_start(ap, fmt);
+ vfprintf(stderr, fmt, ap);
+ va_end(ap);
+ }
+
+ return;
+}
+
+static am7xxx_device *add_new_device(am7xxx_context *ctx,
+ const struct am7xxx_usb_device_descriptor *desc)
+{
+ am7xxx_device **devices_list;
+ am7xxx_device *new_device;
+
+ if (ctx == NULL) {
+ fatal("context must not be NULL!\n");
+ return NULL;
+ }
+
+ new_device = malloc(sizeof(*new_device));
+ if (new_device == NULL) {
+ fatal("cannot allocate a new device (%s)\n", strerror(errno));
+ return NULL;
+ }
+ memset(new_device, 0, sizeof(*new_device));
+
+ new_device->ctx = ctx;
+ new_device->desc = desc;
+ new_device->transfer_completed = 1;
+
+ devices_list = &(ctx->devices_list);
+
+ if (*devices_list == NULL) {
+ *devices_list = new_device;
+ } else {
+ am7xxx_device *prev = *devices_list;
+ while (prev->next)
+ prev = prev->next;
+ prev->next = new_device;
+ }
+ return new_device;
+}
+
+static am7xxx_device *find_device(am7xxx_context *ctx,
+ unsigned int device_index)
+{
+ unsigned int i = 0;
+ am7xxx_device *current;
+
+ if (ctx == NULL) {
+ fatal("context must not be NULL!\n");
+ return NULL;
+ }
+
+ current = ctx->devices_list;
+ while (current && i++ < device_index)
+ current = current->next;
+
+ return current;
+}
+
+static int open_device(am7xxx_context *ctx,
+ unsigned int device_index,
+ libusb_device *usb_dev,
+ am7xxx_device **dev)
+{
+ int ret;
+ int current_configuration;
+
+ *dev = find_device(ctx, device_index);
+ if (*dev == NULL) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* the usb device has already been opened */
+ if ((*dev)->usb_device) {
+ debug(ctx, "(*dev)->usb_device already set\n");
+ ret = 1;
+ goto out;
+ }
+
+ ret = libusb_open(usb_dev, &((*dev)->usb_device));
+ if (ret < 0) {
+ debug(ctx, "libusb_open failed: %s\n", libusb_error_name(ret));
+ goto out;
+ }
+
+ /* XXX, the device is now open, if any of the calls below fail we need
+ * to close it again before bailing out.
+ */
+
+ current_configuration = -1;
+ ret = libusb_get_configuration((*dev)->usb_device,
+ ¤t_configuration);
+ if (ret < 0) {
+ debug(ctx, "libusb_get_configuration failed: %s\n",
+ libusb_error_name(ret));
+ goto out_libusb_close;
+ }
+
+ if (current_configuration != (*dev)->desc->configuration) {
+ /*
+ * In principle, before setting a new configuration, kernel
+ * drivers should be detached from _all_ interfaces; for
+ * example calling something like the following "invented"
+ * function _before_ setting the new configuration:
+ *
+ * libusb_detach_all_kernel_drivers((*dev)->usb_device);
+ *
+ * However, in practice, this is not necessary for most
+ * devices as they have only one configuration.
+ *
+ * When a device only has one configuration:
+ *
+ * - if there was a kernel driver bound to the device, it
+ * had already set the configuration and the call below
+ * will be skipped;
+ *
+ * - if no kernel driver was bound to the device, the call
+ * below will suceed.
+ */
+ ret = libusb_set_configuration((*dev)->usb_device,
+ (*dev)->desc->configuration);
+ if (ret < 0) {
+ debug(ctx, "libusb_set_configuration failed: %s\n",
+ libusb_error_name(ret));
+ debug(ctx, "Cannot set configuration %hhu\n",
+ (*dev)->desc->configuration);
+ goto out_libusb_close;
+ }
+ }
+
+ libusb_set_auto_detach_kernel_driver((*dev)->usb_device, 1);
+
+ ret = libusb_claim_interface((*dev)->usb_device,
+ (*dev)->desc->interface_number);
+ if (ret < 0) {
+ debug(ctx, "libusb_claim_interface failed: %s\n",
+ libusb_error_name(ret));
+ debug(ctx, "Cannot claim interface %hhu\n",
+ (*dev)->desc->interface_number);
+ goto out_libusb_close;
+ }
+
+ /* Checking that the configuration has not changed, as suggested in
+ * http://libusb.sourceforge.net/api-1.0/caveats.html
+ */
+ current_configuration = -1;
+ ret = libusb_get_configuration((*dev)->usb_device,
+ ¤t_configuration);
+ if (ret < 0) {
+ debug(ctx, "libusb_get_configuration after claim failed: %s\n",
+ libusb_error_name(ret));
+ goto out_libusb_release_interface;
+ }
+
+ if (current_configuration != (*dev)->desc->configuration) {
+ debug(ctx, "libusb configuration changed (expected: %hhu, current: %hhu\n",
+ (*dev)->desc->configuration, current_configuration);
+ ret = -EINVAL;
+ goto out_libusb_release_interface;
+ }
+out:
+ return ret;
+
+out_libusb_release_interface:
+ libusb_release_interface((*dev)->usb_device,
+ (*dev)->desc->interface_number);
+out_libusb_close:
+ libusb_close((*dev)->usb_device);
+ (*dev)->usb_device = NULL;
+ return ret;
+}
+
+typedef enum {
+ SCAN_OP_BUILD_DEVLIST,
+ SCAN_OP_OPEN_DEVICE,
+} scan_op;
+
+/**
+ * This is where the central logic of multi-device support is.
+ *
+ * When 'op' == SCAN_OP_BUILD_DEVLIST the parameters 'open_device_index' and
+ * 'dev' are ignored; the function returns 0 on success or a negative value
+ * on error.
+ *
+ * When 'op' == SCAN_OP_OPEN_DEVICE the function opens the supported USB
+ * device with index 'open_device_index' and returns the correspondent
+ * am7xxx_device in the 'dev' parameter; the function returns the value from
+ * open_device(), which is 0 on success, 1 if the device was already open or
+ * a negative value on error.
+ *
+ * NOTES:
+ * if scan_devices() fails when called with 'op' == SCAN_OP_BUILD_DEVLIST,
+ * the caller might want to call am7xxx_shutdown() in order to remove
+ * devices possibly added before the failure.
+ */
+static int scan_devices(am7xxx_context *ctx, scan_op op,
+ unsigned int open_device_index, am7xxx_device **dev)
+{
+ ssize_t num_devices;
+ libusb_device **list;
+ unsigned int current_index;
+ int i;
+ int ret;
+
+ if (ctx == NULL) {
+ fatal("context must not be NULL!\n");
+ return -EINVAL;
+ }
+ if (op == SCAN_OP_BUILD_DEVLIST && ctx->devices_list != NULL) {
+ error(ctx, "device scan done already? Abort!\n");
+ return -EINVAL;
+ }
+
+ num_devices = libusb_get_device_list(ctx->usb_context, &list);
+ if (num_devices < 0) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ current_index = 0;
+ for (i = 0; i < num_devices; i++) {
+ struct libusb_device_descriptor desc;
+ unsigned int j;
+
+ ret = libusb_get_device_descriptor(list[i], &desc);
+ if (ret < 0)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(supported_devices); j++) {
+ if (desc.idVendor == supported_devices[j].vendor_id &&
+ desc.idProduct == supported_devices[j].product_id) {
+
+ if (op == SCAN_OP_BUILD_DEVLIST) {
+ am7xxx_device *new_device;
+ info(ctx, "am7xxx device found, index: %d, name: %s\n",
+ current_index,
+ supported_devices[j].name);
+ new_device = add_new_device(ctx, &supported_devices[j]);
+ if (new_device == NULL) {
+ /* XXX, the caller may want
+ * to call am7xxx_shutdown() if
+ * we fail here, as we may have
+ * added some devices already
+ */
+ debug(ctx, "Cannot create a new device\n");
+ ret = -ENODEV;
+ goto out;
+ }
+ } else if (op == SCAN_OP_OPEN_DEVICE &&
+ current_index == open_device_index) {
+
+ ret = open_device(ctx,
+ open_device_index,
+ list[i],
+ dev);
+ if (ret < 0)
+ debug(ctx, "open_device failed\n");
+
+ /* exit the loop unconditionally after
+ * attempting to open the device
+ * requested by the user */
+ goto out;
+ }
+ current_index++;
+ }
+ }
+ }
+
+ /* if we made it up to here when op == SCAN_OP_OPEN_DEVICE,
+ * no devices to open had been found. */
+ if (op == SCAN_OP_OPEN_DEVICE) {
+ error(ctx, "Cannot find any device to open\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* everything went fine when building the device list */
+ ret = 0;
+out:
+ libusb_free_device_list(list, 1);
+ return ret;
+}
+
+/* Device specific operations */
+
+static int default_set_power_mode(am7xxx_device *dev, am7xxx_power_mode power)
+{
+ int ret;
+ struct am7xxx_header h = {
+ .packet_type = AM7XXX_PACKET_TYPE_POWER,
+ .direction = AM7XXX_DIRECTION_OUT,
+ .header_data_len = sizeof(struct am7xxx_power_header),
+ .unknown2 = 0x3e,
+ .unknown3 = 0x10,
+ };
+
+ switch(power) {
+ case AM7XXX_POWER_OFF:
+ h.header_data.power.bit2 = 0;
+ h.header_data.power.bit1 = 0;
+ h.header_data.power.bit0 = 0;
+ break;
+
+ case AM7XXX_POWER_LOW:
+ h.header_data.power.bit2 = 0;
+ h.header_data.power.bit1 = 0;
+ h.header_data.power.bit0 = 1;
+ break;
+
+ case AM7XXX_POWER_MIDDLE:
+ h.header_data.power.bit2 = 0;
+ h.header_data.power.bit1 = 1;
+ h.header_data.power.bit0 = 0;
+ break;
+
+ case AM7XXX_POWER_HIGH:
+ h.header_data.power.bit2 = 0;
+ h.header_data.power.bit1 = 1;
+ h.header_data.power.bit0 = 1;
+ break;
+
+ case AM7XXX_POWER_TURBO:
+ h.header_data.power.bit2 = 1;
+ h.header_data.power.bit1 = 0;
+ h.header_data.power.bit0 = 0;
+ break;
+
+ default:
+ error(dev->ctx, "Unsupported power mode.\n");
+ return -EINVAL;
+ };
+
+ ret = send_header(dev, &h);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int picopix_set_power_mode(am7xxx_device *dev, am7xxx_power_mode power)
+{
+ switch(power) {
+ case AM7XXX_POWER_LOW:
+ return send_command(dev, AM7XXX_PACKET_TYPE_PICOPIX_POWER_LOW);
+
+ case AM7XXX_POWER_MIDDLE:
+ return send_command(dev, AM7XXX_PACKET_TYPE_PICOPIX_POWER_MEDIUM);
+
+ case AM7XXX_POWER_HIGH:
+ return send_command(dev, AM7XXX_PACKET_TYPE_PICOPIX_POWER_HIGH);
+
+ case AM7XXX_POWER_OFF:
+ case AM7XXX_POWER_TURBO:
+ default:
+ error(dev->ctx, "Unsupported power mode.\n");
+ return -EINVAL;
+ };
+}
+
+static int default_set_zoom_mode(am7xxx_device *dev, am7xxx_zoom_mode zoom)
+{
+ int ret;
+ struct am7xxx_header h = {
+ .packet_type = AM7XXX_PACKET_TYPE_ZOOM,
+ .direction = AM7XXX_DIRECTION_OUT,
+ .header_data_len = sizeof(struct am7xxx_zoom_header),
+ .unknown2 = 0x3e,
+ .unknown3 = 0x10,
+ };
+
+ switch(zoom) {
+ case AM7XXX_ZOOM_ORIGINAL:
+ h.header_data.zoom.bit1 = 0;
+ h.header_data.zoom.bit0 = 0;
+ break;
+
+ case AM7XXX_ZOOM_H:
+ h.header_data.zoom.bit1 = 0;
+ h.header_data.zoom.bit0 = 1;
+ break;
+
+ case AM7XXX_ZOOM_H_V:
+ h.header_data.zoom.bit1 = 1;
+ h.header_data.zoom.bit0 = 0;
+ break;
+
+ case AM7XXX_ZOOM_TEST:
+ h.header_data.zoom.bit1 = 1;
+ h.header_data.zoom.bit0 = 1;
+ break;
+
+ case AM7XXX_ZOOM_TELE:
+ default:
+ error(dev->ctx, "Unsupported zoom mode.\n");
+ return -EINVAL;
+ };
+
+ ret = send_header(dev, &h);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int picopix_set_zoom_mode(am7xxx_device *dev, am7xxx_zoom_mode zoom)
+{
+ int ret;
+ am7xxx_packet_type packet_type;
+
+ switch(zoom) {
+ case AM7XXX_ZOOM_ORIGINAL:
+ packet_type = AM7XXX_PACKET_TYPE_PICOPIX_DISABLE_TI;
+ break;
+
+ case AM7XXX_ZOOM_TELE:
+ packet_type = AM7XXX_PACKET_TYPE_PICOPIX_ENABLE_TI;
+ break;
+
+ case AM7XXX_ZOOM_H:
+ case AM7XXX_ZOOM_H_V:
+ case AM7XXX_ZOOM_TEST:
+ default:
+ error(dev->ctx, "Unsupported zoom mode.\n");
+ return -EINVAL;
+ };
+
+ ret = send_command(dev, packet_type);
+ if (ret < 0)
+ return ret;
+
+ /* The Windows drivers wait for 100ms and send the same command again,
+ * probably to overcome a firmware deficiency */
+ ret = msleep(100);
+ if (ret < 0)
+ return ret;
+
+ return send_command(dev, packet_type);
+}
+
+/* Public API */
+
+AM7XXX_PUBLIC int am7xxx_init(am7xxx_context **ctx)
+{
+ int ret;
+
+ *ctx = malloc(sizeof(**ctx));
+ if (*ctx == NULL) {
+ fatal("cannot allocate the context (%s)\n", strerror(errno));
+ ret = -ENOMEM;
+ goto out;
+ }
+ memset(*ctx, 0, sizeof(**ctx));
+
+ /* Set the highest log level during initialization */
+ (*ctx)->log_level = AM7XXX_LOG_TRACE;
+
+ ret = libusb_init(&((*ctx)->usb_context));
+ if (ret < 0) {
+ error(*ctx, "libusb_init failed: %s\n", libusb_error_name(ret));
+ goto out_free_context;
+ }
+
+ libusb_set_debug((*ctx)->usb_context, LIBUSB_LOG_LEVEL_INFO);
+
+ ret = scan_devices(*ctx, SCAN_OP_BUILD_DEVLIST , 0, NULL);
+ if (ret < 0) {
+ error(*ctx, "scan_devices() failed\n");
+ am7xxx_shutdown(*ctx);
+ goto out;
+ }
+
+ /* Set a quieter log level as default for normal operation */
+ (*ctx)->log_level = AM7XXX_LOG_ERROR;
+ return 0;
+
+out_free_context:
+ free(*ctx);
+ *ctx = NULL;
+out:
+ return ret;
+}
+
+AM7XXX_PUBLIC void am7xxx_shutdown(am7xxx_context *ctx)
+{
+ am7xxx_device *current;
+
+ if (ctx == NULL) {
+ fatal("context must not be NULL!\n");
+ return;
+ }
+
+ current = ctx->devices_list;
+ while (current) {
+ am7xxx_device *next = current->next;
+ am7xxx_close_device(current);
+ free(current->device_info);
+ free(current);
+ current = next;
+ }
+
+ libusb_exit(ctx->usb_context);
+ free(ctx);
+ ctx = NULL;
+}
+
+AM7XXX_PUBLIC void am7xxx_set_log_level(am7xxx_context *ctx, am7xxx_log_level log_level)
+{
+ ctx->log_level = log_level;
+}
+
+AM7XXX_PUBLIC int am7xxx_open_device(am7xxx_context *ctx, am7xxx_device **dev,
+ unsigned int device_index)
+{
+ int ret;
+
+ if (ctx == NULL) {
+ fatal("context must not be NULL!\n");
+ return -EINVAL;
+ }
+
+ ret = scan_devices(ctx, SCAN_OP_OPEN_DEVICE, device_index, dev);
+ if (ret < 0) {
projects / libam7xxx.git / blobdiff